Step-by-Step Guide: How to Clean a Wax Jacket

January 18, 2023

50 Views

A wax jacket is not only a stylish fashion statement, but also a durable and weather-resistant garment. However, over time, dirt, stains, and oils can accumulate on the surface, making the jacket lose its original shine and protection. Cleaning a wax jacket may seem like a daunting task, but with the right steps and techniques, you can restore its appearance and functionality.

Step 1: Prepare the jacket

Before you start cleaning your wax jacket, make sure to remove any loose dirt or debris by gently brushing it off with a soft-bristle brush or a damp cloth. This will prevent any abrasive particles from scratching the fabric during the cleaning process.

Step 2: Spot clean stains

If your wax jacket has stubborn stains or marks, it’s best to spot clean them before proceeding with a full cleaning. Use a mild soap or detergent and a soft cloth or sponge to gently scrub the affected area. Avoid using harsh chemicals or abrasive materials, as they can damage the wax coating.

Tip: Test any cleaning solution on a small, inconspicuous area of the jacket first to ensure it doesn’t discolor or damage the fabric.

Step 3: Hand wash or machine wash

Depending on the care instructions provided by the manufacturer, you can either hand wash or machine wash your wax jacket. Hand washing is generally recommended for better control over the cleaning process. Fill a basin or sink with lukewarm water and add a mild soap or detergent specifically designed for delicate fabrics. Gently agitate the jacket in the soapy water and let it soak for a few minutes.

Step 4: Rinse and dry

After washing, thoroughly rinse the jacket with clean water to remove any soap residue. Squeeze out excess water gently, but avoid wringing or twisting the fabric, as this can damage the wax coating. Lay the jacket flat on a clean towel and gently roll it up to remove more water. Then, hang the jacket in a well-ventilated area to air dry completely.

Step 5: Re-wax if necessary

If your wax jacket has lost its water repellency, you may need to reapply wax to restore its protective properties. Follow the manufacturer’s instructions for the specific wax product you have, and apply the wax evenly to the jacket’s surface using a clean cloth or brush. Allow the wax to penetrate the fabric and dry for the recommended amount of time. Then, use a hairdryer or apply heat with an iron (using a protective cloth) to help the wax melt and bond with the fabric.

By following these step-by-step instructions, you can effectively clean and maintain your wax jacket, ensuring its longevity and functionality for years to come.

Prepare the Wax Jacket

Before cleaning your wax jacket, you need to prepare it by removing any loose dirt and debris. Follow these steps to properly prepare your wax jacket:

1. Shake off Excess Dirt

Take your wax jacket outside and give it a good shake to remove any loose dirt or debris. This will help prevent the dirt from spreading and becoming more difficult to clean.

2. Brush off Surface Dirt

Use a soft-bristled brush or a cloth to gently brush off any remaining surface dirt. Be sure to brush in the direction of the fabric’s grain to avoid damaging the wax coating.

3. Check for Stains

Inspect your wax jacket for any stains or spots. If you spot any stains, make note of their location so you can focus on those areas during the cleaning process.

4. Remove Stubborn Stains

If your wax jacket has any stubborn stains, you can try spot cleaning them before proceeding with the overall cleaning process. Use a mild soap or detergent and a soft cloth to gently dab at the stain. Avoid rubbing or scrubbing too vigorously, as this could damage the fabric.

5. Prepare Cleaning Solution

Depending on the manufacturer’s instructions, you may need to use a specific cleaning solution or wax reproofing product for your jacket. Prepare the cleaning solution according to the instructions provided.

6. Test the Cleaning Solution

Before applying the cleaning solution to the entire jacket, it’s important to test it on a small, inconspicuous area first. Apply a small amount of the solution to an inside seam or hem and gently blot it with a clean cloth. Check for any adverse reactions, such as discoloration or damage to the fabric.

7. Gather Cleaning Tools

Collect the necessary cleaning tools, such as a soft sponge or cloth, a bucket of warm water, and the cleaning solution. Having everything prepared and within reach will make the cleaning process more efficient.

8. Find a Suitable Cleaning Area

Choose a clean, well-ventilated area with a flat surface to clean your wax jacket. It’s best to work outdoors or in a room with good air circulation to ensure proper drying.

By following these steps to prepare your wax jacket, you’ll be ready to move on to the next stage of cleaning and reproofing. Taking the time to properly prepare your jacket will ensure the best possible results and help prolong its lifespan.

Remove Surface Dirt

Before you begin deep cleaning your wax jacket, it’s important to remove any surface dirt or debris.

Start by shaking off or brushing away any loose dirt from the jacket.
Use a soft-bristle brush or a clean cloth to gently brush or wipe away any remaining dirt or dust.
Pay attention to the seams, pockets, and crevices of the jacket where dirt can accumulate.

If the surface dirt is stubborn and won’t come off easily, you can try using a damp cloth or sponge to lightly wipe the affected areas.

Note: Avoid using harsh chemicals or abrasive materials, as they can damage the waxed finish of your jacket.

Spot Clean Stains

If you notice any stains on your wax jacket, it’s important to spot clean them as soon as possible to prevent them from setting in. Here’s a step-by-step guide on how to spot clean stains on your wax jacket:

Identify the type of stain you’re dealing with. Is it oil-based, water-based, or something else?
If the stain is fresh, use a clean cloth or paper towel to blot away as much of the stain as possible. Avoid rubbing, as this can push the stain deeper into the fabric.
If the stain is dry or stubborn, try scraping off any excess residue using a dull knife or spoon. Be gentle to avoid damaging the fabric.
Next, dampen a clean cloth with a small amount of mild detergent mixed with water. Gently blot the stained area, working from the outside towards the center. Avoid saturating the fabric, as this can lead to water damage.
For oil-based stains, you can try using a solvent like white spirits or rubbing alcohol. Apply a small amount to a clean cloth and gently dab the stained area. Test the solvent on a hidden area of the jacket first to ensure it doesn’t cause any damage.
Once the stain has been treated, rinse the area with clean water to remove any remaining soap or solvent residue.
Blot the area with a clean towel to remove excess moisture, then hang the jacket in a well-ventilated area to air dry. Avoid applying heat or using a clothes dryer, as this can damage the wax coating.

Remember, it’s always best to spot clean stains promptly to improve your chances of completely removing them. If you’re dealing with particularly stubborn stains or unsure about how to proceed, it’s always a good idea to seek professional cleaning advice or take your jacket to a professional cleaner.

Clean the Entire Jacket

Once you have addressed any specific stains or spots on your wax jacket, it is time to clean the entire garment. This will help remove any general dirt or grime that may have accumulated over time.

Fill a sink or basin with cool or lukewarm water. Avoid using hot water, as this can damage the wax coating.
Add a mild detergent or soap specifically designed for waxed jackets. Make sure to follow the product instructions for the correct amount to use.
Gently agitate the water to create a soapy solution.
Place the wax jacket into the water and gently swish it around. Pay special attention to areas that are particularly dirty.
Allow the jacket to soak in the soapy water for a few minutes to help loosen dirt.
Using a soft sponge or cloth, gently scrub the entire jacket to remove any remaining dirt. Avoid using abrasive materials that can damage the wax coating.
Rinse the jacket thoroughly with clean water to remove any soap residue.
Wring out the excess water from the jacket, being careful not to twist or wring too hard.
Lay the jacket flat on a clean towel and roll it up to absorb any remaining moisture. Repeat this step with dry towels until the jacket is just damp.
Hang the jacket in a well-ventilated area to air dry completely.

It is important to never machine wash or dry clean a wax jacket, as this can damage the wax coating. Additionally, avoid using bleach or any harsh chemicals on the jacket, as they can also strip away the protective wax.

Re-Wax the Jacket

Once you have cleaned your wax jacket, it’s important to re-wax it to maintain its waterproofing and durability. Re-waxing your jacket will also help restore its original appearance and protect it from the elements.

What You’ll Need:

A tin of wax suitable for wax jackets
A soft cloth or sponge

Step 1: Choose the Right Wax

Select a wax specifically made for wax jackets. There are different types of wax available, such as traditional wax or a wax spray. Read the instructions on the tin, as they may vary depending on the product.

Step 2: Prepare the Jacket

Lay your clean jacket on a flat surface, ensuring that the area is well-ventilated. Open any zip or fastenings to make it easier to apply the wax evenly.

Step 3: Apply the Wax

Dip your soft cloth or sponge into the tin of wax.
Start applying the wax onto the jacket, focusing on the areas that are more prone to wear and tear, such as the elbows, shoulders, and seams. Use a circular motion to rub the wax into the fabric.
Make sure to apply an even layer of wax without leaving any excess residue.

Step 4: Heat the Wax

To help the wax penetrate the fabric, you can use a hairdryer or heat gun on a low setting to warm the wax. Move the heat source back and forth over the jacket until the wax melts and is absorbed by the fabric.

Step 5: Let it Dry and Set

Allow the wax to dry completely. The drying time may vary depending on the type of wax you are using. Refer to the instructions on the tin for guidance. Once the wax is dry, it will provide a protective barrier against water and other elements.

Step 6: Optional – Buff the Jacket

If you prefer a shiny finish, you can use a clean cloth to buff the jacket gently. This will help to bring out the sheen of the wax and give your jacket a polished look.

Step 7: Maintain and Re-Wax Regularly

To keep your wax jacket in optimal condition, it is recommended to re-wax it regularly. The frequency will depend on how often you wear the jacket and the level of protection it needs. Generally, re-waxing once or twice a year should be sufficient.

With these simple steps, you can easily re-wax your jacket and ensure it stays protected and looking its best. Enjoy the benefits of a well-maintained wax jacket that will last you for years to come.

FAQ

Why do I need to clean my wax jacket?

Regular cleaning helps to maintain the durability and waterproofing properties of your wax jacket. It also helps to remove dirt, grime, and odors that may accumulate over time.

Can I clean my wax jacket in a washing machine?

No, it is not recommended to clean a wax jacket in a washing machine as it can strip away the wax coating. Hand washing is the recommended method to clean a wax jacket.